The Failure of the Launch in Thiokol and NASA Term Paper

The Failure of the Launch in Thiokol and NASA - Term wallpaper ExampleThe National Aeronautical and Space Administration (NASA)s flight, which was using the rival spaceship, under the mission, STS 51-L collapse into flames within the first 72 seconds after takeoff, on January 28, 1986 (Kizza 170). The flight was scheduled to occur in July 1985, and it was postponed for three times until the day this flight took off resulting into a fatal accident. This accident destroyed the naturalized reputation of NASA, as well as the prestige attached to the space program. Globally, millions of people were shocked by the event, which unfolded. According to (Kizza), the loss of the Challenger emerged due to a vocalise failure at the lower segments, which atomic number 18 located at the solid rocket motor found on the right side of the Challenger (170). This joint failure was attributed to destruction of seals, which are aimed at preventing leakage of hot gases. As such, a flame leakage of a gas, which is found at the right solid rocket motor adjacent to the joint initiated shortly or at the ignition. This resulted in the initiation of the vehicle structural breakup, as well as the loss of the Space Shuttle Challenger in the STS 51-L Mission. Further investigations indicated that sabotage and pay-load or elements of the STS 51-L Shuttle did not contribute towards the joint failure. Moreover, the design specifications of the Shuttle were not altered. This was a conclusion was arrived at after the presidential term of the investigations on non-conformance, quality control, assembly, manufacturing, and materials for the Space Shuttle were conducted. The launch activities of the Space Shuttle, including preparation and assembly were in accordance of rights with procedures, which are established. This indicates that the launch activities were not factors of considerations as the main sources or contributors towards the occurrence of the accident. In the manufacturin g process of a vehicle or any machine, design is a critical step, which engineers focus on in secern to ensure that the designed machine, vehicle, or equipment has the ability to attain the desired objectives.